There are a variety of plans on the internet that explain how to build a shed on your own. There are also a lot of variations. These are the basic steps for creating exterior housing for your personal mementos and tools.
Storage units range from the extremely small to the massive. You should determine how big your shed needs to be. This can be done by determining what you plan to store in it.
It is important to make sure that your shed is entirely protected from the weather, especially if you are storing clothing or valuables. This will help to protect the contents. You may even opt to include insulation in the wall cavities to stabilize the temperature.
Most sheds are built starting from the ground up. If you decide to build from the ground up, the first step in building a shed is to install deck piers for the foundation. These are going to be used to support the shed.[I:http://www.merlindabobis.com/wp-content/uploads/2010/05/LarryKelly0.png]
Once you have your deck piers in place you are going to move on to attaching beams to your building. Eventually these beams will be the support for your flooring. They are an important building factor since they support the weight of shed contents.
Once the beams are down add some floor joists. These are the next layer in flooring.
The floor joists now need to be covered in plywood subflooring. You will need to cover the floor joists with two layers of plywood that is around 3/4″ thick. Nail the outside edge of the plywood every 6″ or screw down with 3″ deck screws. This secures your subfloor to the foundation.
Once the floor is down it is time to begin on the walls. Do this by constructing four stud walls using 2X4′s every 16-24 inches around the perimeter of the building. You are creating the frame for your shed. Leave spaces for your windows and doors and add the support for these items at this point.
Stud walls for a shed will typically hold many shelves. In order to give yourself the option of a lot of shelves you need to install what is known as noggings. Noggings are vertical boards placed across the studs to provide a surface for attaching shelves.
Next add a floor plate made out of 2″ X 4″ boards to the bottom perimeter of the building. These should be used to aid in attaching the wall frames at the four corners. Everything should be flush and you should have a nice even shape to your emerging unit at this point.
Now it is time to add the floor. Add top plates around the frame in the same manner you added the bottom plates. Cut and fix two beams on top and middle of the top plates. Now you can move on to the rafters. Rafters should always be around 2″ apart. Adding noggings to the rafters will help to support the roof.
Once the frame is complete the roof will be created using layers of 1/2″ plywood and three rows of purlins to each side. Fascia board should then be added flush with the purlin. Make sure that you have a good level underlay before adding your roofing material. Most people use a simple tin roof for their shed design.
Add your roofing material and then move down to the walls. The walls are the final part. Add an underlay and then apply exterior and interior paneling of your choice. Attach any doors or windows and you are finished.
Most people could make use of additional garden or lawn storage, but need shed plans for how to instructions. Now you can easily download shed plans and have all the outdoor storage you need.